How To Improve Water Pressure of City Water

Low water pressure can turn simple tasks like showering or washing dishes into frustrating ordeals. If you’re dealing with weak water flow in your home, you’re not alone. Many homeowners on city water face this issue. The good news is that there are several ways to diagnose and improve your water pressure. In this guide, we’ll walk you through understanding your home’s water pressure system, identifying problems, and implementing solutions to get your water flowing again.

Understanding Your Home’s Water Pressure System

City water systems rely on a network of pumps and water towers to deliver water to homes. The water pressure in your house is largely determined by the elevation difference between your home and the water source, as well as the demand on the system.

Water enters your home through the main supply line, typically located near your water meter. From there, it’s distributed throughout your house via a series of pipes. For most homes, the ideal water pressure range is between 30 and 80 pounds per square inch (psi). Pressure below 30 psi is considered low and can lead to performance issues with appliances and weak water flow from faucets and showerheads. Pressure above 80 psi can strain your plumbing system and potentially cause damage over time.

Water pressure can fluctuate throughout the day based on usage patterns in your neighborhood. However, significant or persistent drops in pressure may indicate a problem that needs attention.

Diagnosing Low Water Pressure Issues

If you’re experiencing low water pressure, the first step is to identify the root cause. There are several common culprits, and understanding them can help you take the right corrective action.

Common Low Water Pressure Causes

These are some of the most common low water pressure culprits:

• Clogged pipes or fixtures: Mineral buildup or debris can restrict water flow.
• Leaks in the plumbing system: Even small leaks can significantly impact water pressure.
• Municipal supply problems: Sometimes, the issue lies with the city’s water supply.
• Partially closed main water valve: The valve may not be fully open after maintenance.
• Pressure regulator issues: A faulty or improperly adjusted regulator can limit pressure.

How To Test Your Water Pressure

To accurately measure your home’s water pressure, you’ll need a simple tool called a pressure gauge. Here’s how to use it:

1. Locate an outdoor faucet or hose bib, preferably one close to where the main water line enters your home.
2. Ensure all water-using appliances and fixtures in your home are turned off.
3. Attach the pressure gauge to the faucet and turn it on fully.
4. Read the pressure on the gauge—the ideal pressure is between 30 and 80 psi.

Quick Fixes To Boost Water Pressure

Before calling a professional, there are simple steps you can take to try to improve your water pressure.

Clearing Clogged Fixtures and Pipes

Mineral deposits and debris can accumulate in your pipes and fixtures over time, restricting water flow. Here’s how to address this:

• Check for pipe obstructions: If you suspect a clog deeper in your plumbing, consider hiring a professional to inspect and clear your pipes.
• Clean faucet aerators and showerheads: Unscrew these components and soak them in vinegar overnight to dissolve mineral buildup.
• Flush your water heater: Sediment can collect in your water heater, affecting pressure. Consult your owner’s manual for safe flushing procedures.

Adjusting the Main Water Valve

Sometimes, the main water valve isn’t fully open, limiting water flow to your entire house. To check and adjust it, take the following steps:

1. Locate your main water valve, typically near the water meter or where the main line enters your home.
2. Make sure the valve is fully open. For gate valves, turn the handle counterclockwise until it stops. For ball valves, the handle should be parallel to the pipe when fully open.
3. If the valve was partially closed, opening it fully may immediately improve your water pressure.

Advanced Solutions for Persistent Low Water Pressure

If the quick fixes don’t solve your low-pressure issues, consider more advanced solutions.

Modifying the Pressure-Reducing Valve

Many homes have a pressure-reducing valve (PRV) installed to protect the plumbing system from excessive pressure. However, this valve can sometimes be set too low or malfunction. Here’s how to address PRV issues:

1. Locate the PRV, usually near the main water shut-off valve.
2. Look for an adjustment screw on top of the valve.
3. To increase pressure, turn the screw clockwise. Make small adjustments and retest the pressure after each turn.
4. If adjusting doesn’t help, or if the valve appears damaged, consider replacing it.

Working with a PRV can be tricky, and incorrect adjustments can lead to plumbing damage. If you’re unsure, consult a professional plumber.

Installing a Water Pressure Booster Pump

A water pressure booster pump might be the solution for homes with consistently low water pressure due to their location or distance from the municipal supply. These devices increase water pressure throughout your home.

Installing a booster pump is a complex job that typically requires professional expertise. A plumber will assess your home’s needs and recommend an appropriately sized pump. The pump is usually installed near the main water line entry point. Additional components like a pressure tank may be needed for optimal performance. Costs can vary, but according to Angi, the average booster pump installation costs between $300 and $8,000.

While effective, booster pumps consume electricity and may increase your energy bills. Weigh the benefits against the long-term costs before deciding on this option.

When To Call a Professional

While many water pressure issues can be resolved with DIY solutions, some problems require professional attention. Knowing when to call in an expert can save you time, money, and potential damage to your plumbing system. Consider contacting a plumber if you notice any of the following signs:

• Discolored water or strange odors from your taps
• Persistent low pressure despite trying the solutions mentioned earlier
• Sudden, unexplained drops in water pressure
• Unusually high water bills without increased usage
• Visible leaks or water stains on walls, ceilings, or floors

These symptoms could indicate more serious issues, such as mainline breaks, hidden leaks, or problems with your home’s plumbing infrastructure.

When selecting a plumber, look for licensed and insured professionals with positive online reviews and references. They should have experience with water pressure issues. Get multiple quotes from different contractors to compare prices, and make sure they offer a warranty on their work.

Maintaining Optimal Water Pressure Long-Term

Once you’ve resolved your immediate water pressure issues, take action to maintain good pressure over time. Here are some plumbing maintenance tips:

• Inspect visible pipes regularly for signs of leaks or corrosion.
• Clean faucet aerators and showerheads every few months.
• Have your water heater flushed annually.
• Consider scheduling annual plumbing inspections with a professional.
• Address minor issues promptly before they become major problems.

Keeping an eye on your water pressure can help you catch issues early. Invest in a permanent pressure gauge for your main water line and check your water pressure periodically—especially after any plumbing work. Keep a log of pressure readings to track any trends over time.

If you’re unsure about any step in the process or if your water pressure problems persist despite your efforts, don’t hesitate to consult a professional plumber. They can provide expert diagnosis and implement solutions tailored to your home’s specific needs, ensuring you enjoy strong, consistent water pressure.

For More:

How To Install a Water Pressure Reducing Valve

How To Install a Water Pressure Booster